Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
A specially formulated adhesive and primer system which delivers a strong bond on all plastics, even polyethylene, polypropylene & ABS.
It also bonds plastic to non-plastic surfaces (e.g. metals, timber, china, some rubbers, leather & paper).
It is shock resistant, giving you a longer lasting fix.
Directions:
Ensure the surfaces to be joined are close fitting, clean, dry and free of dust.
Using the primer pen, liberally coat plastic surfaces that are to be bonded.
Pierce seal at end of adhesive tube by attaching nozzle with cap and turning clockwise.
Remove cap and apply a very small amount of glue to one surface only.
Bring surfaces together and apply slight pressure until adhesive grabs (30 seconds). Allow at least 30 minutes for sufficient bond strength for practical use.
Wipe tip of tube, replace cap and store upright in a dry cool place. Ensure cap on primer pen is tightly closed. Keep this card for directions.
Note:
Not for glass.
If using on leather, test on an inconspicuous area first, as adhesive may cause leather to discolour or harden.
Best results for nylon items are achieved without initial priming.
Will also bond plastic to non-plastic surfaces. Do not use primer on non-plastic surfaces.
Safety Directions:
KEEP OUT OF REACH OF CHILDREN.
Do not swallow. Avoid contact with skin and eyes.
May produce an allergic reaction.
Wear eye protection and protective gloves when mixing or using.
Avoid breathing vapour.
Avoid release to the environment.
This product is hazardous.
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.