Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
A super strong two part epoxy that has excellent adhesion to a broad range of surfaces and can hold up to 150Kg, making it ideal for sticking heavy loads.
Sticks: Wood, Metal, Masonry, China, Glass, leather, Rubber, Most Plastics.
Directions:
Clean and dry surfaces.
Snap out cap from plunger and carefully cut the sealed tips at the end of the syringe nozzle
Dispense equal parts of both liquids onto a clean disposable surface and mix both parts together thoroughly.
Leave for 5-10 minutes and mix again before applying. The mixed glue will remain usable for 1 hour at 20°C.
Apply mixed glue to both surfaces of job - then bring together.
Do not apply undue strain to bond for 6-8 hours. Hold join in place using tapes or weights if necessary. Maximum strength reached after 24-72 hours.
Place cap from plunger on nozzle for storage. Clean up uncured Araldite with acetone (nail polish remover)
Holds up to 150Kg per cm2 when fully cured on steel.
Note:
Bond strength will soften above 80°C but strength is retained when temperature returns to normal.
Will not bond Polyethylene or Polypropylene plastics.
Allow for longer bonding times in colder weather.
Safety Directions:
KEEP OUT OF REACH OF CHILDREN.
Do not swallow. Avoid contact with skin and eyes.
May produce an allergic reaction.
Wear eye protection and protective gloves when mixing or using.
Avoid breathing vapour.
Avoid release to the environment.
This product is hazardous.
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.