Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
A clear, fast setting, two part epoxy adhesive which provides a rigid durable bond to a wide range of surfaces.
Sticks: China, Metal, Glass, Leather, Rubber, Wood, Most Plastics.
Directions:
Clean and dry surfaces.
Snap out cap from plunger and carefully cut the sealed tips at the end of the syringe nozzle.
Hold syringe with tip pointing up, then push self mixing nozzle past the prongs and rotate anti-clockwise to lock in.
Push down plunger until self mixing nozzle is filled with adhesive. Apply adhesive directly to both surfaces of job-then bring together. Adhesive in nozzle is usable for 2-3 mins before setting in nozzle.
Do not apply undue strain to bond for 30 mins. Hold join in place using tapes or weights if necessary. Maximum strength reached after 16 hours.
Remove and dispose of self mixing nozzle before adhesive sets (2-3 mins). Remove excess glue before placing cap onto string for storage.
Holds up to 75Kg per cm2 when fully cured on steel.
Note:
Bond strength will soften above 60°C but strength is retained when temperature returns to normal.
Will not bond Polyethylene or Polypropylene plastics.
Allow for longer bonding times in colder weather.
Safety Directions:
KEEP OUT OF REACH OF CHILDREN.
Do not swallow. Corrosive. Causes burns. Avoid contact with skin and eyes.
May produce an allergic reaction.
Wear eye protection and protective gloves when mixing or using.
Avoid breathing vapour.
Avoid release to the environment.
This product is hazardous.
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.