SELLEYS Super Strength Araldite 24ml Holds Up To 150Kg Stick Masonry ARS 24M

• A super strong two part epoxy that has excellent adhesion to a broad range of surfaces and can hold up to 150Kg, making it ideal for sticking heavy loads.
• Sticks: Wood, Metal, Masonry, China, Glass, leather, Rubber, Most Plastics.

Directions: 

• Clean and dry surfaces.
• Snap out cap from plunger and carefully cut the sealed tips at the end of the syringe nozzle
• Dispense equal parts of both liquids onto a clean disposable surface and mix both parts together thoroughly.
• Leave for 5-10 minutes and mix again before applying. The mixed glue will remain usable for 1 hour at 20°C.
• Apply mixed glue to both surfaces of job - then bring together.
• Do not apply undue strain to bond for 6-8 hours. Hold join in place using tapes or weights if necessary. Maximum strength reached after 24-72 hours.
• Place cap from plunger on nozzle for storage. Clean up uncured Araldite with acetone (nail polish remover)
• Holds up to 150Kg per cm2 when fully cured on steel.

Note: 

• Bond strength will soften above 80°C but strength is retained when temperature returns to normal.
• Will not bond Polyethylene or Polypropylene plastics.
• Allow for longer bonding times in colder weather.

Safety Directions: 

• KEEP OUT OF REACH OF CHILDREN.
• Do not swallow. Avoid contact with skin and eyes.
• May produce an allergic reaction.
• Wear eye protection and protective gloves when mixing or using.
• Avoid breathing vapour.
• Avoid release to the environment.
• This product is hazardous.