Package included in:

1 x 380ml cartridges

2 x Static mixer nozzles

Descriptions:

Fast cure, styrene free, medium duty adhesive for anchoring threaded studs and reinforcing bar into solid concrete, stone, hollow brick and hollow concrete block.
Fast cure
Threaded studs
Starter bars
Solid concrete
Hollow concrete block
Hollow brick
Carbide drilled holes
Dry & flooded holes

Features:

Handy Tips:

Ensure you tape both sides of the gap before applying the product. This ensures a neat finish and makes it easier to clean up.
When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of gap filler, and a perfect finish.
If you are going to wipe off the excess gap filler with a wet finger, ensure you wet your finger with water and not saliva, as saliva contains bacteria and this will increase the chances of mould growing in your gap filler.
Allow the surfaces to skin prior to painting, which is approximately 30 minutes. Protect from rain until firmly skinned. Allow for longer skin and cure times in damp conditions.
Some water based under coats & flat paints may crack on drying. To reduce this effect allows the product to cure for 24 hours in small gaps or 48 hours in larger gaps before painting with such paints.
Keep a pack of SELLEYS Hand Kleen Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures. They are an easy and effective way to keep clean on the job.

Safety Tips:

Avoid eye contact and repeated or prolonged skin contact. Wash hands after use. Keep out of reach of children.
For advice, contact a Poisons Information Centre (AUS 131 126; NZ 0800 764 766) or a doctor.
For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.