SELLEYS KNEAD it Polymer Repair Compound Multi Purpose 50g

• Selleys Knead It Multipurpose is a versatile, hand kneadable fast setting epoxy putty that is ideal for repairing, rebuilding, reshaping or restoring almost anything.
• It can be drilled, filed, machined, screwed, sawn, sanded, stained and painted.

Features: 

• Versatile hand kneadable, fast setting, co-extruded epoxy glue
• Ideal for repairing, rebuilding, reshaping or restoring almost anything
• Will not sag, run or drip
• Can be drilled, filed, machined, screwed, sawn, sanded, stained and painted
• Heat resistant to 120°C continuously or 140°C intermittently
• Quick set time - less than 10 min
• Suitable for contact with drinking water

Where can this product be used?

• Repair and replacement - timber, metal, masonry, many plastics*, ceramics
• Mending - toys, appliances, lawn mowers, sports equipment etc
• Sealing - leaks in gutters and downpipes
• Patching - chipped concrete, floors, bricks, blocks etc
• Attaching - fixtures, machine tags, signs etc
• Anchoring - bolts, screws, housings etc
• Moulding - to reform-reshape damaged timber, metal, masonry, plastics, ceramics
• Moulding to rebuild - wrought iron fencing
• Forming knobs and missing parts
• Balancing - table legs etc
• Fixing a damaged roof tile
• Repairing a water (drinking) tank
• Lost the head off your hammer? Make a new one with Knead It.
• Replace chip in golf club (woods)
• Approval for Drinking Water Contact to AS/'NZ4020:2005, however limited to maximum surface area:volume ratio of 100 mm2/L atmaximum temperature of 85°C.

What materials is this product suitable for?

• Wood/Timber
• Concrete
• Anchoring bolts
• Metal
• Masonry
• Most plastics*
• Ceramics
• *Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber

Directions: 

1. Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
2. Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour.  If mixing is difficult, warm to room temperature.
3. Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
4. For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
5. Trim away any excess before initial hardening.  Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
6. After 5-10 minutes Knead It Multi Purpose will harden and begin to form a strong bond. After 60 minutes Knead It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
7. Wash hands thoroughly with soap and water before product hardens.

Handy Tips: 

• Ensure the putty and hardener are mixed properly. Knead-It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from thre knead-it.
• To help determine when your knead it has set, keep a small piece off to check- when it is hard, it indicates your job is done.
• Use Knead-It Aqua for applications in wet/ submerged areas.
• Use Knead-It Steel for applications on metal or fuel contact
• For cleaning surfaces prior to application of adhesive, if the surface is porous, we would recommend using SELLEYS Liquid Sugar Soap. If the surface is non-porous eg glass or metal, firstly clean the surface with mineral turpentine and then again with methylated spirits. If there is old, difficult to remove residue such as old paint, we recommend using paint stripper such as SELLEYS Kwik Strip Smart. Ensure the surface is dry before applying the product
• Keep a canister of SELLEYS Sugar Soap Wipes nearby for a quick and effective cleanup

Clean Up: