A clear, fast setting, two part epoxy adhesive which provides a rigid durable bond to a wide range of surfaces.
Stick Metal, China, Leather, Glass, Rubber, Wood, Most Plastics.
Directions:
Clean and dry surfaces.
Pierce each tube with spike found in top of its own cap.
Squeeze out equal amounts from each tube onto the mixing tray and mix both parts together thoroughly. The mixed glue will remain usable for 2-3 min at 20ºC.
Apply mixed glue to both surfaces of job - then bring together.
Do not apply undue strain to bond for 30 mins. Hold join in place using tapes or weights if necessary. Maximum strength reached after 16 hours.
Place cap from plunger on nozzle for storage. Clean up uncured Araldite with acetone (nail polish remover).
Holds up to 75Kg per cm2 when fully cured on steel.
Note:
Bond strength will soften above 60°C but strength is retained when temperature returns to normal.
Will not bond Polyethylene or Polypropylene plastics.
Allow for longer bonding times in colder weather.
Safety Directions:
Do not swallow. Corrosive. Causes burns. Avoid contact with skin and eyes.
KEEP OUT OF REACH OF CHILDREN.
May produce an allergic reaction.
Wear eye protection and protective gloves when mixing or using.
Avoid breathing vapour.
Avoid release to the environment.
This product is hazardous.
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.