A clear, fast setting, two part epoxy adhesive which provides a rigid durable bond to a wide range of surfaces.
Sticks: China, Metal, Glass, Leather, Rubber, Wood, Most Plastics.
Directions:
Do not Swallow. Corrosive. Causes burns. Avoid contact with skin and eyes.
Clean and dry surfaces.
Snap out cap from plunger and carefully cut the sealed tips at the end of the syringe nozzle.
Dispense equal parts of both liquids onto a clean disposable surface and mix both parts together thoroughly. The mixed glue will remain usable for 2-3 min at 20ºC.
Apply mixed glue to both surfaces of job - then bring together.
Do not apply undue strain to bond for 30 mins. Hold join in place using tapes or weights if necessary. Maximum strength reached after 16 hours.
Place cap from plunger on nozzle for storage. Clean up uncured Araldite with acetone (nail polish remover).
Holds up to 75Kg per cm2 when fully cured on steel.
Note:
Bond strength will soften above 60°C but strength is retained when temperature returns to normal.
Will not bond Polyethylene or Polypropylene plastics.
Allow for longer bonding times in colder weather.
Safety Directions:
KEEP OUT OF REACH OF CHILDREN.
May produce an allergic reaction.
Wear eye protection and protective gloves when mixing or using.
Avoid breathing vapour.
Avoid release to the environment.
This product is hazardous.
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.